收藏本站
3.1.9
Arming Threshold Registers (ARMT_P, ARMT_N)
These registers contain the positive and negative thresholds to be used by the arming function. Refer to Section 3.8.9 for more
details regarding the arming function.
These registers can be written during initialization but are locked once the ENDINIT bit is set. Refer to Section 3.1.6.2 . These
registers are included in the writable register CRC check. Refer to Section 3.2.2 for details.
Table 17. Arming Threshold Registers
Location
Bit
Address
$10
$12
Register
ARMT_P
ARMT_N
7
AT_P[7]
AT_N[7]
6
AT_P[6]
AT_N[6]
5
AT_P[5]
AT_N[5]
4
AT_P[4]
AT_N[4]
3
AT_P[3]
AT_N[3]
2
AT_P[2]
AT_N[2]
1
AT_P[1]
AT_N[1]
0
AT_P[0]
AT_N[0]
Reset Value
0
0
0
0
0
0
0
0
The values programmed into the threshold registers are the threshold values used for the arming function as described in
Section 3.8.9 . The threshold registers hold independent unsigned 8-bit values for polarity. Each threshold increment is equivalent
to one output LSB. Table 18 shows examples of some threshold register values and the corresponding threshold.
Table 18. Threshold Register Value Examples
Axis Type
Programmed Thresholds
Range
(g)
20
20
50
120
Sensitivity
(g/LSB)
0.04097
0.04097
0.1024
0.24414
Positive
(Decimal)
100
255
50
20
Negative
(Decimal)
50
0
20
10
Positive Threshold
(g)
4.10
10.45
5.12
4.88
Negative Threshold
(g)
-2.05
Disabled
-2.05
-2.44
If either the positive or negative threshold is programmed to $00, comparisons are disabled for only that polarity. The arming
function still operates for the opposite polarity. If both the positive and negative arming thresholds are programmed to $00, the
Arming function is disabled, and the output pin is disabled, regardless of the value of the A_CFG bits in the DEVCFG register.
3.1.10 Device Status Register (DEVSTAT)
The device status register is a read-only register. A read of this register clears the status flags affected by transient conditions.
Reference Section 4.5 for details on the MMA685x response for each status condition.
Table 19. Device Status Register
Location
Bit
Address
$14
Register
DEVSTAT
7
UNUSED
6
IDE
5
SDOV
4
DEVINIT
3
MISOERR
2
0
1
OFFSET
0
DEVRES
3.1.10.1
Unused Bit (UNUSED)
The unused bit has no impact on operation or performance. When read this bit may be ‘1’ or ‘0’.
3.1.10.2
Internal Data Error Flag (IDE)
The internal data error flag is set if a customer or OTP register data CRC fault or other internal fault is detected as defined in
Section 4.5.5 . The internal data error flag is cleared by a read of the DEVSTAT register. If the error is associated with a CRC fault
in the writable register array, the fault will be re-asserted and will require a device reset to clear. If the error is associated with the
data stored in the fuse array, the fault will be re-asserted even after a device reset.
3.1.10.3
Sigma Delta Modulator Over Range Flag (SDOV)
The sigma delta modulator over range flag is set if the sigma delta modulator becomes saturated. The SDOV flag is cleared
by a read of the DEVSTAT register.
MMA685x
Sensors
18
Freescale Semiconductor, Inc.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MMA7331LR2 ACCELEROMETER 4G XYZ ENH 14-LGA
MMA8451QT IC ACCELEROMETER 3AXIS 16QFN
MMA8452QR1 IC ACCELER 2G/4G/8G 3AXIS 16QFN
MMA8453QR1 IC ACCELER 2G/4G/8G 3AXIS 16QFN
MMBF0201NLT1 MOSFET N-CH 20V 300MA SOT-23
MMBF170-7 MOSFET N-CH 60V 500MA SOT23-3
MMBF170LT1 MOSFET N-CH 60V 500MA SOT-23
MMBF170 MOSFET N-CH 60V 500MA SOT-23
相关代理商/技术参数
MMA6854KWR2 功能描述:加速计 - 板上安装 X-AXIS 75G RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C
MMA6855BKW 功能描述:加速计 - 板上安装 X-AXIS 120G QFN RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C
MMA6855BKWR2 功能描述:加速计 - 板上安装 X-AXIS 120G QFN RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C
MMA6855KW 功能描述:加速计 - 板上安装 X-AXIS 120G QFN RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C
MMA6855KWR2 功能描述:加速计 - 板上安装 X-AXIS 120G QFN RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C
MMA6856BKW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Single-Axis SPI Inertial Sensor
MMA6856BKWR2 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Single-Axis SPI Inertial Sensor
MMA6856KW 功能描述:加速计 - 板上安装 X-AXIS 60G QFN RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C